ISO9001:2015
CTF/CTQ Controlling Points Sheet for cold shrink products
CTF (Critical to Function)
| NO | Item | Required | Controlling Points |
| 1 | Elongation | ≥670% | Sampling test for each lot of material |
| 2 | Tensile strength | ≥7.16Mpa | Sampling test for each lot of material |
| 3 | Tear Strength | ≥35KN/m | Sampling test for each lot of material |
| 4 | Waterproof rating | IPX7 | Sampling test for each lot of material |
CTQ (Critical to Quality)
| NO | Item | Required | Controlling Points |
| 1 | Expanded Inner diameter | L±3mm | Inspection per each lot during first tour and final inspection according to method of MIL-STD-105E, LEVEIL, AQL=0.65. |
| 2 | Expanded Outer diameter | OD±4mm | Inspection per each lot during first tour and final inspection according to method of MIL-STD-105E, LEVEIL, AQL=0.65. |
| 3 | Expanded tube length | L±10mm | 100% Inspection by comparing with standard sample |
| 4 | Recovered tube length | L±5mm | 100% Inspection by comparing with standard sample |
| 5 | Recovered wall thickness | T±0.6mm | Inspection per each lot during first tour and final Inspection |
| 6 | Elongation | ≥670% | Sample 5 pcs for each lot |
| 7 | Tensile strength | ≥7.16Mpa | Sample 5 pcs for each lot |
| 8 | Tear Strength | ≥35KN/m | Sample 5 pcs for each lot |
| 9 | Waterproof rating | IPX7 | Sample pcs for each lot |
| |
Standard:CE for winding machine |
| |
Standard:SGS For Plastic Strip |
 |
Standard:SGS For Silicone Tube |
 |
Standard:CE for expanding machine |
 |
Standard:SGS For EPDM Sleeve |
 |
Standard:CE for extrusion line |
 |
Standard:ISO9001 |
Contact Person: Mr. Richard Lee
Tel: +8618627678155
