The silicone rubber cold shrink Insulator connector is made of special silicone rubber raw materials, which has the advantages of large shrinkage rate, excellent physical and mechanical properties, and puncture resistance. It is suitable for waterproof and moisture-proof sealing of communication and cable TV connection joints, insulation sealing of wire and cable connections, and insulation protection of other types of connectors
Silicone cold shrink Insulator connector Features
1:Simple installation; requires no tools.
2:No torches or heat required .
3:Good thermal stability .
4:Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure .
5:Excellent wet electrical properties .
6:Water-resistant.
Silicone cold shrink Insulator connector properties
| Items | Type Value |
| Temperatures Range | -40℃ to +200℃ |
| Tensile Strength/Mpa | >8 |
| Elongation at break | >800 |
| Shore A hardness | 40-45 |
| Tear Strength N/MM | ≥35 |
| Volume Resistivity/Ω.cm | >1×1013 |
| Sealing Protection grade | IP67 |
| Dielectric Strength Kv/mm | >20 |
| Plastic strip core ID | 40±2mm |
| Length After shrink | 130mm |
| ID after shrink | 9±2mm |
Contact Person: Mr. Richard Lee
Tel: +8618627678155
