خانه محصولاتلوله کوچک کننده سیلیکون

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube

گواهی
چین HENGYANG ZK INDUSTRIAL CO., LTD گواهینامه ها
چین HENGYANG ZK INDUSTRIAL CO., LTD گواهینامه ها
نظرات مشتریان
توصیه بسیار خوب دستگاه

—— کارولین

دستگاه خوب ، ممنون از راهنماییتون

—— ریچارد

لوله کوچک سازی EPDM شما بسیار خوب است ، ما به همکاری خود ادامه خواهیم داد

—— جنی

تیم شما در صنعت جمع شدن سرد بسیار حرفه ای است

—— میشل

چت IM آنلاین در حال حاضر

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube
Non-Solidify No-Leak Built in Mastic Cold Shrink Tube Non-Solidify No-Leak Built in Mastic Cold Shrink Tube Non-Solidify No-Leak Built in Mastic Cold Shrink Tube

تصویر بزرگ :  Non-Solidify No-Leak Built in Mastic Cold Shrink Tube

جزئیات محصول:
محل منبع: چین
نام تجاری: ZKCS
گواهی: ROHS 2.0
شماره مدل: سفارشی
پرداخت:
مقدار حداقل تعداد سفارش: 500 عدد
قیمت: Negotitaion
جزئیات بسته بندی: 50 عدد یا 100 عدد در کارتن
زمان تحویل: 10-20 روز
شرایط پرداخت: D/P،T/T،D/A
قابلیت ارائه: 100000 کامپیوتر در ماه
مخاطب الان چت کن

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube

شرح
Uvresistance: عالی ویژگی: ضد آب، مهر و موم
روش نصب: جمع شدگی سرد، بدون نیاز به گرمایش عملکرد: مقاومت در برابر درجه حرارت بالا
رنگ: مشکی ضخامت دیوار: به طور معمول 1.5 میلی متر تا 3 میلی متر
محدوده دمای عملیاتی: -55 درجه سانتیگراد تا 200 درجه سانتیگراد اندازه: قطر و طول داخلی سفارشی
کلمه کلیدی: کانکتور جمع شدن سرد
برجسته کردن:

Active Breathing Seal,All-Weather Durability ,High Mechanical Damage Resistance

,

All-Weather Durability

,

High Mechanical Damage Resistance

Product Name:

Built in Mastic Cold Shrink Tube

Product Introduction:

The Non-Solidify No-Leak Built in Mastic Cold Shrink Tube is specifically designed for outdoor telecom and CATV connections requiring permanent waterproofing. During installation, simply remove the inner core; this Built in Mastic Cold Shrink Tube automatically shrinks and tightly wraps around connectors and cable interfaces.

Unlike ordinary sealants, this Built in Mastic Cold Shrink Tube solidifies without flowing, ensuring reliable sealing even on irregular connector surfaces. Both ends of the Built in Mastic Cold Shrink Tube create a tight inner-wall seal, forming a complete barrier against rainwater. Whether used on 1/2 jumpers, N-type connectors in telecom base stations, or DIN heads in CATV systems, this Built in Mastic Cold Shrink Tube delivers long-term insulation and sealing protection.

Every Built in Mastic Cold Shrink Tube passes rigorous aging and weather resistance tests for harsh outdoor environments. Another version of this Built in Mastic Cold Shrink Tube is also ideal for quick repairs of general wire and cable connections — truly one tube for multiple applications.

Product Applications:

Widely used for:

  • Waterproof sealing of coaxial cables in telecom base stations (N-type connectors, 1/2 jumpers, DIN heads)

  • Sealing of cable TV connectors

  • Wire and cable connection sealing & insulation

  • General connector and cable joint protection against moisture ingress

Key Features:

  1. Solidifies without leaking – The built-in mastic slowly solidifies after shrinking, providing reliable flow-sealing without leaking or contaminating equipment.

  2. Dual-end inner wall sealing – Both ends of the tube tightly adhere to the cable inner wall, preventing rainwater ingress.

  3. Aging & weather resistant – UV-resistant and ozone-resistant materials ensure long service life in harsh outdoor environments.

  4. parameters:

    Properties Test Method Typical Value
    Color / Light grey
    Ultimate Tensile ASTM D412-75 9.0MPa
    Ultimate Elongation ASTM D412-75 750%
    Tear Resistance ASTM D624C-73 30KN/m
    Fungus Resistance ASTM G21 28 days exposure No Growth
    Dielectric Strength ASTM D149-75 @1.75 Original 21KV/m
    7days in water at 90℃ 20.5KV/m
    Volume resistance ASTM D257 3.4×1015Ohm.cm

Product pictures:

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube 0

Non-Solidify No-Leak Built in Mastic Cold Shrink Tube 1


Non-Solidify No-Leak Built in Mastic Cold Shrink Tube 2



FAQ:

Q1: What makes this Built in Mastic Cold Shrink Tube different from heat shrink tubing?

A: No heat required. This  shrinks automatically by removing the inner core. The built-in mastic solidifies without leaking, providing reliable flow sealing for telecom and CATV connections.

Q2: Can it be used for CATV connectors and general wire splicing?

A: Yes. This  works perfectly for CATV connectors, N-type, DIN heads, 1/2 jumpers, and general wire/cable insulation sealing.

Q3: How does it prevent rainwater ingress?

A: Both ends of this create tight inner-wall sealing against the cable, blocking rainwater from entering along the connection.

Q4: Does the mastic flow or leak after long-term use?

A: No. It solidifies slowly after shrinking and does not leak or overflow. That is the key feature of this  — reliable sealing without contamination.

Q5: Is it weather-resistant and long-lasting?

A: Yes. Every is UV-resistant, ozone-resistant, and aging-resistant, ensuring long service life in outdoor environments like telecom base stations.

اطلاعات تماس
HENGYANG ZK INDUSTRIAL CO., LTD

تماس با شخص: Mr. Richard Lee

تلفن: +8618627678155

ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)