বাড়ি পণ্যকোল্ড সঙ্কুচিত টিউব

No-leak protection for cables —Built in mastic cold shrink tube

সাক্ষ্যদান
চীন HENGYANG ZK INDUSTRIAL CO., LTD সার্টিফিকেশন
চীন HENGYANG ZK INDUSTRIAL CO., LTD সার্টিফিকেশন
ক্রেতার পর্যালোচনা
খুব ভাল মেশিনের সুপারিশ

—— ক্যারোলিন

চমৎকার মেশিন, আপনার সাহায্যের জন্য ধন্যবাদ

—— রিচার্ড

আপনার EPDM ঠান্ডা সঙ্কুচিত নলটি খুব সুন্দর, আমরা আমাদের সহযোগিতা চালিয়ে যাব

—— জেনি

আপনার দল শীতল সঙ্কুচিত শিল্পে খুব পেশাদার

—— মিশেল

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন

No-leak protection for cables —Built in mastic cold shrink tube

No-leak protection for cables —Built in mastic cold shrink tube
No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube

বড় ইমেজ :  No-leak protection for cables —Built in mastic cold shrink tube

পণ্যের বিবরণ:
উৎপত্তি স্থল: চীন
পরিচিতিমুলক নাম: ZKCS
সাক্ষ্যদান: ROHS 2.0
মডেল নম্বার: কাস্টমাইজড
প্রদান:
ন্যূনতম চাহিদার পরিমাণ: 1000 পিসি
মূল্য: Negotitaion
প্যাকেজিং বিবরণ: 50 পিসি বা 100 পিসি / শক্ত কাগজ
ডেলিভারি সময়: 10-20 দিন
পরিশোধের শর্ত: D/A, D/P, T/T
যোগানের ক্ষমতা: 100000 পিসি/মাস
যোগাযোগ এখন চ্যাট

No-leak protection for cables —Built in mastic cold shrink tube

বিবরণ
প্রতিরোধ: চমৎকার কর্মক্ষমতা এক: উচ্চ ভোল্টেজ প্রতিরোধের
মেটাল: সিলিকন ব্যবহার করুন: টেলিযোগাযোগ টাওয়ার
OD পরে সঙ্কুচিত: 9.5 মিমি ভিতরে: ম্যাস্টিক
ফ্যাব্রিকেশন মেশিন: টেক্সটাইল প্রসারিত মেশিন যথার্থ স্তর: উচ্চ নির্ভুলতা
কাজের তাপমাত্রা: -55 থেকে 150 সে টাইপ: ঠান্ডা সঙ্কুচিত টিউব
বিশেষভাবে তুলে ধরা:

Active Breathing Seal

,

All-Weather Durability

,

High Mechanical Damage Resistance

Product Name:

Built in Mastic Cold Shrink Tube

Product Introduction:

This Built in mastic cold shrink tube is made for outdoor telecom and CATV connections. Just pull the cord – no heat needed. Each Built in mastic cold shrink tube has pre-installed mastic that sets without leaking or overflowing. The two ends of the Built in mastic cold shrink tube create tight inner-wall sealing against rain. Whether for N-type, 1/2 jumpers, DIN heads, or CATV connectors, this Built in mastic cold shrink tube delivers reliable insulation and waterproofing. It also works for general wire splicing. Choose this Built in mastic cold shrink tube for one-tube, multiple-solution sealing.

Product Applications:

  • Waterproof sealing of coaxial cables in telecom base stations (N-type, 1/2 jumper, DIN head, 1/2 jumper connector)

  • CATV connector waterproof sealing

  • Wire and cable connection & insulation sealing

  • Outdoor protection for various connectors and joints

Key Features:

  1. Sets without leaking – reliable flow sealing

  2. Both ends seal against inner cable wall – blocks rain ingress

  3. Weather & aging resistant – long service life

4.parameters:

Properties Test Method Typical Value
Color / Light grey
Ultimate Tensile ASTM D412-75 9.0MPa
Ultimate Elongation ASTM D412-75 750%
Tear Resistance ASTM D624C-73 30KN/m
Fungus Resistance ASTM G21 28 days exposure No Growth
Dielectric Strength ASTM D149-75 @1.75 Original 21KV/m
7days in water at 90℃ 20.5KV/m
Volume resistance ASTM D257 3.4×1015Ohm.cm

Product pictures:

No-leak protection for cables —Built in mastic cold shrink tube 0

No-leak protection for cables —Built in mastic cold shrink tube 1


No-leak protection for cables —Built in mastic cold shrink tube 2



FAQ:

Q1: Does it need heat?
A: No. Just pull – it shrinks automatically.

Q2: Does it leak or overflow?
A: No. It sets without leaking – clean and reliable.

Q3: Can it stop rainwater?
A: Yes. Both ends seal against the inner cable wall.

Q4: How long does it last outdoors?
A: Very long. Weather and aging resistant.

Q5: What connectors can it be used on?
A: N-type, 1/2 jumper, DIN head, CATV, wires & cables.

যোগাযোগের ঠিকানা
HENGYANG ZK INDUSTRIAL CO., LTD

ব্যক্তি যোগাযোগ: Mr. Richard Lee

টেল: +8618627678155

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)

অন্যান্য পণ্যসমূহ