होम उत्पादशीत हटना ट्यूब

No-leak protection for cables —Built in mastic cold shrink tube

प्रमाणन
चीन HENGYANG ZK INDUSTRIAL CO., LTD प्रमाणपत्र
चीन HENGYANG ZK INDUSTRIAL CO., LTD प्रमाणपत्र
ग्राहक समीक्षा
बहुत अच्छी मशीन सिफारिश

—— कैरलाइन

अच्छी मशीन, आपकी मदद के लिए धन्यवाद

—— रिचर्ड

आपका ईपीडीएम कोल्ड सिकुड़ ट्यूब बहुत अच्छा है, हम अपना सहयोग जारी रखेंगे

—— जेनी

आपकी टीम कोल्ड सिकुड़न उद्योग में बहुत पेशेवर है

—— मिशेल

मैं अब ऑनलाइन चैट कर रहा हूँ

No-leak protection for cables —Built in mastic cold shrink tube

No-leak protection for cables —Built in mastic cold shrink tube
No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube

बड़ी छवि :  No-leak protection for cables —Built in mastic cold shrink tube

उत्पाद विवरण:
उत्पत्ति के प्लेस: चीन
ब्रांड नाम: ZKCS
प्रमाणन: ROHS 2.0
मॉडल संख्या: स्वनिर्धारित
भुगतान & नौवहन नियमों:
न्यूनतम आदेश मात्रा: 1000 पीसी
मूल्य: Negotitaion
पैकेजिंग विवरण: 50 पीसी या 100 पीसी / गत्ते का डिब्बा
प्रसव के समय: 10-20 दिन
भुगतान शर्तें: डी/ए,डी/पी,टी/टी
आपूर्ति की क्षमता: 100000 पीसी/महीना
संपर्क करें अभी बातचीत करें

No-leak protection for cables —Built in mastic cold shrink tube

वर्णन
Uvresistance: उत्कृष्ट प्रदर्शन एक: उच्च वोल्टेज प्रतिरोध
मैटल: सिलिकॉन उपयोग: दूरसंचार टॉवर
सिकुड़न के बाद OD: 9.5 मिमी अंदर: गोंद
निर्माण मशीन: कपड़ा विस्तार मशीन परिशुद्धता स्तर: उच्चा परिशुद्धि
कार्य तापमान: -55 से 150C प्रकार: कोल्ड सिकुड़न ट्यूब
प्रमुखता देना:

Active Breathing Seal

,

All-Weather Durability

,

High Mechanical Damage Resistance

Product Name:

Built in Mastic Cold Shrink Tube

Product Introduction:

This Built in mastic cold shrink tube is made for outdoor telecom and CATV connections. Just pull the cord – no heat needed. Each Built in mastic cold shrink tube has pre-installed mastic that sets without leaking or overflowing. The two ends of the Built in mastic cold shrink tube create tight inner-wall sealing against rain. Whether for N-type, 1/2 jumpers, DIN heads, or CATV connectors, this Built in mastic cold shrink tube delivers reliable insulation and waterproofing. It also works for general wire splicing. Choose this Built in mastic cold shrink tube for one-tube, multiple-solution sealing.

Product Applications:

  • Waterproof sealing of coaxial cables in telecom base stations (N-type, 1/2 jumper, DIN head, 1/2 jumper connector)

  • CATV connector waterproof sealing

  • Wire and cable connection & insulation sealing

  • Outdoor protection for various connectors and joints

Key Features:

  1. Sets without leaking – reliable flow sealing

  2. Both ends seal against inner cable wall – blocks rain ingress

  3. Weather & aging resistant – long service life

4.parameters:

Properties Test Method Typical Value
Color / Light grey
Ultimate Tensile ASTM D412-75 9.0MPa
Ultimate Elongation ASTM D412-75 750%
Tear Resistance ASTM D624C-73 30KN/m
Fungus Resistance ASTM G21 28 days exposure No Growth
Dielectric Strength ASTM D149-75 @1.75 Original 21KV/m
7days in water at 90℃ 20.5KV/m
Volume resistance ASTM D257 3.4×1015Ohm.cm

Product pictures:

No-leak protection for cables —Built in mastic cold shrink tube 0

No-leak protection for cables —Built in mastic cold shrink tube 1


No-leak protection for cables —Built in mastic cold shrink tube 2



FAQ:

Q1: Does it need heat?
A: No. Just pull – it shrinks automatically.

Q2: Does it leak or overflow?
A: No. It sets without leaking – clean and reliable.

Q3: Can it stop rainwater?
A: Yes. Both ends seal against the inner cable wall.

Q4: How long does it last outdoors?
A: Very long. Weather and aging resistant.

Q5: What connectors can it be used on?
A: N-type, 1/2 jumper, DIN head, CATV, wires & cables.

सम्पर्क करने का विवरण
HENGYANG ZK INDUSTRIAL CO., LTD

व्यक्ति से संपर्क करें: Mr. Richard Lee

दूरभाष: +8618627678155

हम करने के लिए सीधे अपनी जांच भेजें (0 / 3000)

अन्य उत्पादों