บ้าน ผลิตภัณฑ์ท่อหดเย็น

No-leak protection for cables —Built in mastic cold shrink tube

ได้รับการรับรอง
จีน HENGYANG ZK INDUSTRIAL CO., LTD รับรอง
จีน HENGYANG ZK INDUSTRIAL CO., LTD รับรอง
ความคิดเห็นของลูกค้า
คำแนะนำเครื่องที่ดีมาก

—— แคโรไลน์

เครื่องดีขอบคุณสำหรับความช่วยเหลือ

—— ริชาร์ด

ท่อหดเย็น EPDM ของคุณดีมากเราจะดำเนินความร่วมมือต่อไป

—— เจนนี่

ทีมงานของคุณเป็นมืออาชีพในอุตสาหกรรมหดเย็น

—— มิเชล

สนทนาออนไลน์ตอนนี้ฉัน

No-leak protection for cables —Built in mastic cold shrink tube

No-leak protection for cables —Built in mastic cold shrink tube
No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube No-leak protection for cables —Built in mastic cold shrink tube

ภาพใหญ่ :  No-leak protection for cables —Built in mastic cold shrink tube

รายละเอียดสินค้า:
สถานที่กำเนิด: จีน
ชื่อแบรนด์: ZKCS
ได้รับการรับรอง: ROHS 2.0
หมายเลขรุ่น: ปรับแต่ง
การชำระเงิน:
จำนวนสั่งซื้อขั้นต่ำ: 1,000 ชิ้น
ราคา: Negotitaion
รายละเอียดการบรรจุ: 50 ชิ้นหรือ 100 ชิ้น / กล่อง
เวลาการส่งมอบ: 10-20 วัน
เงื่อนไขการชำระเงิน: D/A,D/P,T/T
สามารถในการผลิต: 100000 ชิ้น/เดือน
ติดต่อ คุยตอนนี้

No-leak protection for cables —Built in mastic cold shrink tube

ลักษณะ
ความต้านทานต่อแสง: ยอดเยี่ยม ประสิทธิภาพอย่างหนึ่ง: ความต้านทานไฟฟ้าแรงสูง
เมทัล: ซิลิโคน ใช้: หอคอยโทรคมนาคม
OD หลังจากหดตัว: 9.5 มม ข้างใน: สีเหลืองอ่อน
เครื่องผลิต: เครื่องขยายสิ่งทอ ระดับความแม่นยำ: มีความแม่นยำสูง
อุณหภูมิในการทำงาน: -55 ถึง 150C พิมพ์: ท่อหดเย็น
เน้น:

Active Breathing Seal

,

All-Weather Durability

,

High Mechanical Damage Resistance

Product Name:

Built in Mastic Cold Shrink Tube

Product Introduction:

This Built in mastic cold shrink tube is made for outdoor telecom and CATV connections. Just pull the cord – no heat needed. Each Built in mastic cold shrink tube has pre-installed mastic that sets without leaking or overflowing. The two ends of the Built in mastic cold shrink tube create tight inner-wall sealing against rain. Whether for N-type, 1/2 jumpers, DIN heads, or CATV connectors, this Built in mastic cold shrink tube delivers reliable insulation and waterproofing. It also works for general wire splicing. Choose this Built in mastic cold shrink tube for one-tube, multiple-solution sealing.

Product Applications:

  • Waterproof sealing of coaxial cables in telecom base stations (N-type, 1/2 jumper, DIN head, 1/2 jumper connector)

  • CATV connector waterproof sealing

  • Wire and cable connection & insulation sealing

  • Outdoor protection for various connectors and joints

Key Features:

  1. Sets without leaking – reliable flow sealing

  2. Both ends seal against inner cable wall – blocks rain ingress

  3. Weather & aging resistant – long service life

4.parameters:

Properties Test Method Typical Value
Color / Light grey
Ultimate Tensile ASTM D412-75 9.0MPa
Ultimate Elongation ASTM D412-75 750%
Tear Resistance ASTM D624C-73 30KN/m
Fungus Resistance ASTM G21 28 days exposure No Growth
Dielectric Strength ASTM D149-75 @1.75 Original 21KV/m
7days in water at 90℃ 20.5KV/m
Volume resistance ASTM D257 3.4×1015Ohm.cm

Product pictures:

No-leak protection for cables —Built in mastic cold shrink tube 0

No-leak protection for cables —Built in mastic cold shrink tube 1


No-leak protection for cables —Built in mastic cold shrink tube 2



FAQ:

Q1: Does it need heat?
A: No. Just pull – it shrinks automatically.

Q2: Does it leak or overflow?
A: No. It sets without leaking – clean and reliable.

Q3: Can it stop rainwater?
A: Yes. Both ends seal against the inner cable wall.

Q4: How long does it last outdoors?
A: Very long. Weather and aging resistant.

Q5: What connectors can it be used on?
A: N-type, 1/2 jumper, DIN head, CATV, wires & cables.

รายละเอียดการติดต่อ
HENGYANG ZK INDUSTRIAL CO., LTD

ผู้ติดต่อ: Mr. Richard Lee

โทร: +8618627678155

ส่งคำถามของคุณกับเราโดยตรง (0 / 3000)

ผลิตภัณฑ์อื่น ๆ